These mounts replace the forward spring hanger on 83-97 Ford Ranger.  They are made in two different versions.  The first is factory height.  This one is a heavy duty replacement of the factory mount.  The second lowers the spring mounting bolt 2 3/8 of an inch.  This will give you approximately 1.25 inch of lift.  If used with the dropped shackle hanger, combined they will give a total of 2 3/8 inches of lift in the rear.  Or you can remove the factory block and keep the same ride height. Made out of 3/16" plate.  They come unwelded.  Mounting hardware is not included.   Half inch grade 8 bolts is recommended.